Buy 2 sets of rims and get the 3rd set FREE. ((YOU MUST HAVE AT LEAST 3 SETS OF RIMS AT CHECKOUT TO WORK!!!)) ((Excludes Audio, Accessories, Stickers, Custom Orders and Custom trunk audio kits))
-3D printed resin wheels & tires for a 1/25 scale.
JTX DUBMARINER CUSTOM FLOATERS - Comes in a staggered (has deeper rear rim) or standard offset (4-Front Rims). I made the dial, bezel and hands all separate for easier customization. Purchased sets will have two tiny holes on either side of the hub so can use a thick paper clip or equivalent to push the face out from the back of the rim once the face is installed, easy peezy.
Each set comes with the following items:
4 - Hoops
4 - Tires
4 - Bearings
4 - Dials
4 - Bezels
4 - Sets of hands (minute, hour, seconds are one piece together)
- Please do not use anything other than a pointed curved-head set of tweezers to remove the spinner face one installed. I sell a cheap bearing and spinner face removal kit, or you can buy the tweezers at most stores and Amazon. 2nd) Do not paint the cup the bearings sit, or you'll be sitting with a fresh exacto-blade cutting that paint or coating out so your bearing will fit again and don't paint the pin on the backside of the face. You can use a metal rod or model car metal axle to remove the bearing from the rim, use the pointed curved tweezers to remove the bearing if stuck to the face. I designed these to be as user friendly as possible.
-These are raw unpainted resin parts that may require light sanding depending on the level of detail wanted by the customer.
-It's your responsibility to ask any and all questions prior to making a purchase!
-Thanks for stopping by and be sure to check out my store to see what new items have been added. TY
-NOTHING IN THE PICTURES OR ANYTHING IN THE BACKGROUND ARE INCLUDED IN ANY SALES AND ARE USED FOR VISUAL REFERENCE PURPOSES ONLY!
